Let's Get Started with the Truck Spoiler Repair:
As you can see in the picture the spoiler has a big crack in the fiberglass.
Apply the integrator generously into and around the cracks. Use the activator spray 310 to accelerate and fully cure the integrator.
On the front side of the spoiler, apply the integrator to the cracks, filling in any voids. Using the activator spray apply a thin coat over the integrator.
Note: When using the activator always remember to spray a thin mist of activator to the integrator with the spray tip about 6 inches from the integrator.
After cured about 2 minutes, sand the crack-filled integrator to make smooth, wipe of dust, then paint.
You have fixed the spoiler . . . It looks as good as new!
The cracked area is stronger than original.
No Bondo; just sanded and painted with aerosol paint from O’Reilly Auto Parts.